BLEND

BLEND command is used to create a smooth spline curve that connects two selected lines, arcs, elliptical arcs, spirals, open polylines, or open splines. Below are the detailed steps to use this command:

1. Access the Command:
   • Type BLEND or BLE in the command line and press Enter.
2. Select the First Object:
   • The command prompts you to select the first object near the endpoint where you want the spline to start.
   • Click on the first line, arc, elliptical arc, spiral, open polyline, or open spline.
3. Select the Second Object:
   • Next, the command prompts you to select the second object near the endpoint where you want the spline to end.
   • Click on the second line, arc, elliptical arc, spiral, open polyline, or open spline.
4. Finish the Command:
   • Once the blend is created and adjusted to your satisfaction, you can exit the command by pressing Esc or starting a new command.

Example Workflow #

1. Draw two non-parallel lines that you want to connect smoothly.
2. Type BLEND and press Enter.
3. Select the endpoint of the first line.
4. Select the endpoint of the second line.
5. Adjust the spline using grips if needed.